| Product | Quantity | |
|---|---|---|
| CLD Tiles™ | 75 | |
| Plain MLV 1/8" 1 lb/ft² 54" - Linear Feet | 26 | |
| Sheets 1/8"x36"x54" Neoprene/EPDM Closed Cell Foam | 10 | |
| Hydrophobic Melamine Foam - 3/4"x24"x24" (4 ft²) pieces | 5 | |
| Velcro® Strips, Adhesive both sides - 2"x4" | 34 | |
| HH-66 Vinyl Contact Cement - 32 oz can | 1 |
Doors (each):
5 CLD Tiles, outer skin
2 CLD Tiles, cut into smaller pieces, inner skin
8.6 ft² MLV
8.6 ft² 1/8" CCF
4 Velcro Strips, adhesive 2 sides
My usual preference is to hang the barrier layers (CCF and MLV) on the inner door skin. I don't believe your Mustang has space there. The alternative is to hang the MLV and CCF on the outer door skin. There is enough CCF and MLV for either.
Passenger Compartment Quarter Panels (each):
1 CLD Tile, outer skin
.5 CLD Tile, cut into smaller pieces, trim panel
1.3 ft² MLV
1.3 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides
Kick Panels (each):
1 CLD Tile
2.3 ft² MLV
2.3 ft² 1/8" CCF
1 Velcro Strip, adhesive 2 sides
Floor:
9 CLD Tiles
30.5 ft² MLV
50 ft² 1/8" CCF (extra is to double up in the foot wells)
2 Velcro Strips, adhesive 2 sides
Back Seat Platform / Riser:
4 CLD Tiles
7 ft² MLV
7 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides
Roof:
10 CLD Tiles
17 ft² 3/4" Hydrophobic Melamine Foam
* The Hydrophobic Melamine requires at least 3/4" clearance between the roof and headliner.
Rear Deck:
2 CLD Tiles
2.9 ft² 1/8" CCF
C-Pillars (each):
1 CLD Tiles
Trunk Floor:
11 CLD Tiles
18.3 ft² MLV
18.3 ft² 1/8" CCF
4 Velcro Strips, adhesive 2 sides
Trunk Lid:
6 CLD Tiles
Be aware that you will be looking at CLD Tiles every time you open the trunk if there isn't a trim panel on the trunk lid.
Quarter Panels (each):
5 CLD Tiles
9.2 ft² MLV
9.2 ft² 1/8" CCF
4 Velcro Strips, adhesive 2 sides
Trunk Back Wall:
3 CLD Tiles
5.5 ft² MLV
5.5 ft² 1/8" CCF
2 Velcro Strips, adhesive 2 sides
Totals:
75 CLD Tiles
109.6 ft² MLV
132 ft² 1/8" CCF
17 ft² 3/4" Hydrophobic Melamine Foam
34 Velcro Strips, adhesive 2 sides
1 32 oz can HH-66 Vinyl Contact Cement