Honda S2000 Roadster 2004-2009

Generation: 
2nd
Measured Year: 
2 006
Net Weight Added to Vehicle in lbs.: 
79
Product Quantity
CLD Tiles™ 40
Plain MLV 1/8" 1 lb/ft² 54" - Linear Feet 17
Sheets 1/8"x36"x54" Neoprene/EPDM Closed Cell Foam 6
Velcro® Strips, Adhesive both sides - 2"x4" 27
HH-66 Vinyl Contact Cement - 32 oz can 1

This materials list is an estimate based on measurements provided by a customer or customers. Quantities should be considered what I expect to need for the project instead of what I know will be needed. This turns out to be very close in almost every case but is absolutely not guaranteed! "Add to Cart" for total, shipping and purchase.

Product Distribution by Area: 

Doors (each):
4 CLD Tiles™, outer skin
1 CLD Tile™, probably cut into smaller pieces, inner skin
1 CLD Tile™, probably cut into smaller pieces, trim panel
4.7 ft² MLV
6 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides

Passenger Compartment Quarter Panels (each):
1 CLD Tiles™, outer skin
.5 CLD Tile™, probably cut into smaller pieces, trim panel
1.7 ft² MLV
2 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides

Kick Panels (each):
.5 CLD Tiles™
.9 ft² MLV
.9 ft² 1/8" CCF
1 Velcro Strips, adhesive 2 sides

Floor:
6 CLD Tiles™ (assumes significant coverage from the factory)
25 ft² MLV
25 ft² 1/8" CCF
4 Velcro Strips, adhesive 2 sides

Back Wall:
4 CLD Tiles™
6.4 ft² MLV
6.4 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides

Rear Deck:
2 CLD Tiles™
2.8 ft² 1/8" CCF (to decouple the trim panel)

Trunk Floor / Spare Tire Well:
4 CLD Tiles™, horizontal surfaces
3 CLD Tiles™ sides of spare wells
11.9 ft² MLV
11.9 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides

Quarter Panels (each):
2 CLD Tiles™
2.8 ft² MLV
2.8 ft² 1/8" CCF
2 Velcro Strips, adhesive 2 sides

Trunk Lid:
I'd leave it alone.

Trunk Back Wall:
2 CLD Tiles™
3.4 ft² MLV
3.4 ft² 1/8" CCF
2 Velcro Strips, adhesive 2 sides