Scion xB 4 door Hatchback 2003-2007

Generation: 
1st
Measured Year: 
2 006
Dimmensions: 
Scion xB 4 door Hatchback 2003-2007 Dimensions
Net Weight Added to Vehicle in lbs.: 
106
Product Quantity
CLD Tiles™ 65
Extruded Butyl Rope - 15 feet 3/8" 1
Plain MLV 1/8" 1 lb/ft² 54" - Linear Feet 20
Sheets 1/8"x36"x54" Neoprene/EPDM Closed Cell Foam 8
Hydrophobic Melamine Foam - 3/4"x24"x24" (4 ft²) pieces 9
Velcro® Strips, Adhesive both sides - 2"x4" 23
HH-66 Vinyl Contact Cement - 32 oz can 1

This materials list is an estimate based on measurements provided by a customer or customers. Quantities should be considered what I expect to need for the project instead of what I know will be needed. This turns out to be very close in almost every case but is absolutely not guaranteed! "Add to Cart" for total, shipping and purchase.

Product Distribution by Area: 

Front Doors (each):
5 CLD Tiles, outer skin
1 CLD Tile, cut into smaller pieces, inner skin
1 CLD Tile, cut into smaller pieces, trim panel
Extruded Butyl Rope
6.3 ft² MLV
9.4 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides

Rear Doors (each):
4 CLD Tiles, outer skin
1 CLD Tile, cut into smaller pieces, inner skin
1 CLD Tile, cut into smaller pieces, trim panel
Extruded Butyl Rope
5.4 ft² MLV
8.2 ft² 1/8" CCF
2.5 Velcro Strips, adhesive 2 sides

Kick Panels (each):
.5 CLD Tiles
.5 ft² MLV
.5 ft² 1/8" CCF
1 Velcro Strips, adhesive 2 sides

Floor:
7 CLD Tiles (assumes significant coverage from the factory)
33.6 ft² MLV
48.6 ft² 1/8" CCF (extra is to double up in the bottoms of the foot wells)
2 Velcro Strips, adhesive 2 sides

Back Seat Platform / Riser:
3 CLD Tiles (assumes significant coverage from the factory)
9.1 ft² MLV
9.1 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides

Roof:
20 CLD Tiles
32.7 ft² 3/4" Hydrophobic Melamine Foam

Cargo Area Floor / Spare Tire Well:
2 CLD Tiles (assumes significant coverage from the factory)
7.6 ft² MLV
7.6 ft² 1/8" CCF
3 Velcro Strips, adhesive 2 sides

Quarter Panels (each):
.5 CLD Tiles
.4 ft² 3/4" Hydrophobic Melamine Foam

I usually try to get CCF and MLV in the quarter panels. These are too small and with glass all around them, it's not worth the effort. Maybe use some scraps to line the portion below the glass? Should be a good opportunity to add some more Hydrophobic Melamine.

Hatch Door:
5 CLD Tiles
5.9 ft² MLV
5.9 ft² 1/8" CCF
4 ft² 3/4" Hydrophobic Melamine Foam
3 Velcro Strips, adhesive 2 sides

Totals:
65 CLD Tiles
1 roll Extruded Butyl Rope
80.6 ft² MLV
107.4 ft² 1/8" CCF
37.5 ft² 3/4" Hydrophobic Melamine Foam
23 Velcro Strips, adhesive 2 sides
1 32 oz can HH-66 Vinyl Contact Cement